Pump Control Panels
Pump Control Panels are intelligent electrical control systems designed to operate, monitor, and protect pumps in water supply, firefighting, irrigation, wastewater, and industrial pumping applications. They ensure reliable pump performance through automatic start/stop control, fault protection, status monitoring, and system management.
These control panels are commonly used together with electric pumps, diesel engine pumps, jockey pumps, pressure tanks, sensors, valves, level switches, and remote monitoring systems. They are widely installed in commercial buildings, industrial plants, municipal water systems, agricultural irrigation projects, fire protection systems, wastewater treatment facilities, and pumping stations.
VFD Water Supply Cabinet
Variable Frequency Control Cabinets
Variable Frequency Control Cabinets are intelligent control systems designed to regulate pump motor speed through Variable Frequency Drives (VFDs), enabling automatic pressure, flow, and energy management. By adjusting motor speed according to system demand, they reduce energy consumption, minimize water hammer, and extend equipment service life.
These cabinets are commonly integrated with booster pump systems, centrifugal pumps, multistage pumps, sewage pumps, pressure tanks, pressure sensors, flow meters, level switches, and PLC control systems. They are widely used in municipal water supply, building water boosting, industrial process systems, irrigation projects, HVAC systems, and wastewater treatment plants.
Applications
• Constant Pressure Water Supply Systems
• Building Water Boosting Systems
• Municipal Water Supply Networks
• Industrial Water Circulation Systems
• HVAC & Cooling Water Systems
• Agricultural Irrigation Systems
• Wastewater & Sewage Pumping Stations
• Hotels, Hospitals & Commercial Buildings
Parameter Range
• Power Range: 0.75 kW – 500 kW
• Voltage: 220V / 380V / 415V / 440V / 480V
• Frequency: 50Hz / 60Hz
• Control Pumps: 1 – 8 Pumps
• Protection Grade: IP30 / IP55
• Communication: Modbus RTU
Model Examples
•WKY-2BP-0.75
•WKY-3BP-0.75
•WKY-4BP-0.75
•WKY-8BP-0.75- SMG
Soft Starter Cabinets
Soft Starter Cabinets are motor control systems designed to reduce the starting current and mechanical impact of electric motors during startup. By gradually increasing voltage, they provide smooth motor acceleration, protect electrical equipment, and extend the service life of pumps and motors.
These cabinets are commonly used with centrifugal pumps, multistage pumps, deep well pumps, sewage pumps, booster pump systems, electric motors, pressure tanks, sensors, and PLC control systems. They are widely applied in water supply, irrigation, industrial processes, HVAC systems, wastewater treatment plants, and pumping stations.
Soft Starter Cabinet
Applications
• Municipal Water Supply Systems
• Building Water Boosting Systems
• Industrial Process Water Systems
• Agricultural Irrigation Systems
• HVAC & Cooling Water Circulation
• Wastewater & Sewage Pumping Stations
• Mining & Dewatering Projects
• Pumping Stations & Water Treatment Plants
Parameter Range
• Power Range: 5.5 kW – 500 kW
• Voltage: 220V / 380V / 415V / 440V / 480V
• Frequency: 50Hz / 60Hz
• Soft Start Current: 1.5 – 4 Times Rated Current
• Start Time: 1 – 60 Seconds Adjustable
• Protection Grade: IP30/ IP55
• Motor Capacity: Single Pump or Multi-Pump Systems
• Communication: Modbus RTU / RS485
Model Examples
•WYK-1R-5.5
•WYK-2R-7.5
•WYK-4R-160
ATS Cabinets
WYK-ATS Cabinet
ATS Cabinets (Automatic Transfer Switch Cabinets) are power switching systems designed to automatically transfer electrical loads between the main power supply and a backup generator when a power failure occurs. They ensure continuous power supply to critical equipment and minimize downtime during power interruptions.
These cabinets are commonly used together with diesel generator sets, fire pump control panels, fire pump systems, booster pump systems, transfer switches, circuit breakers, and monitoring systems. They are widely installed in fire protection systems, commercial buildings, hospitals, data centers, industrial plants, airports, and municipal infrastructure projects where uninterrupted power supply is essential.
Applications
• Fire Protection Systems
• Commercial Buildings
• Hospitals & Healthcare Facilities
• Data Centers & Telecommunication Facilities
• Industrial Plants & Factories
• Airports & Transportation Hubs
• Municipal Infrastructure Projects
• Power Backup Systems
Parameter Range
• Rated Current: 63A – 3200A
• Rated Voltage: 380V / 400V / 480V
• Frequency: 50Hz / 60Hz
• Transfer Time: ≤ 5 s
• Number of Power Sources: 2 (Main Power + Generator)
• Protection Grade: IP30 / IP55
• Control Mode: Automatic / Manual
• Communication: Modbus RTU / RS485
Model Examples
• WYK-ATS-250
• WYK-ATS-630
• WYK-ATS-1600
PLC Control Cabinets
PLC Control Cabinets are intelligent automation control systems designed to monitor, control, and coordinate the operation of pumps, motors, valves, sensors, and other field equipment. Using a Programmable Logic Controller (PLC), they provide precise process control, automatic operation, fault monitoring, data collection, and remote communication.
These cabinets are commonly integrated with water supply pumps, booster pump systems, fire pump systems, sewage pumps, deep well pumps, pressure sensors, flow meters, level transmitters, valves, VFDs, soft starters, and SCADA systems. They are widely used in water treatment plants, municipal water supply systems, industrial facilities, irrigation projects, HVAC systems, and wastewater treatment plants.
PLC Pump Control Cabinet
Applications
• Municipal Water Supply Systems
• Water Treatment Plants
• Wastewater & Sewage Treatment Plants
• Industrial Process Control Systems
• Building Booster Pump Systems
• Agricultural Irrigation Systems
• HVAC & Cooling Water Systems
• Pumping Stations & Utility Infrastructure
Parameter Range
• Power Supply: 220V DC 24
• PLC Brand: Siemens / Schneider / ABB / Mitsubishi
• I/O Capacity: 16 – 512 Points
• Communication: Modbus RTU / Modbus TCP / Profibus / Profinet / Ethernet
• HMI Touch Screen: 7" – 15" Optional
• Protection Grade: IP30 / IP55
• Remote Monitoring: SCADA / GSM / Ethernet Optional